FPV ProtocolFPVNeeds verification

Analog FPV (5.8GHz) — RF Signal Parameters

Public RF frequency and signal parameters for the Analog FPV (5.8GHz), including control link, video downlink, GPS bands, and relevant counter-UAS planning bands.

Signal Parameters

Control Frequency2.4GHz / 433MHz / 868MHz (varies by RC protocol)
Video ProtocolAnalog video (NTSC/PAL)
Video Frequency5.8GHz (5645–5945 MHz)
GPS BandsN/A
Max TX Power25 mW to 600 mW

Authorized Counter-UAS Planning Bands

For lawful RF monitoring, lab validation, or controlled counter-UAS planning, compare system coverage against these public reference bands:

5.8GHz (video); 433MHz / 868MHz / 2.4GHz (control)

RF Detection

Configure scan range to include 2.4GHz / 433MHz / 868MHz (varies by RC protocol) for signal identification.

Mitigation Planning

Use 5.8GHz (video); 433MHz / 868MHz / 2.4GHz (control) as a reference for authorized coverage checks and compliance review.

Data source: FCC Part 15 / Industry standard

Data Confidence

Public documentation / estimate

Needs verification

Based on public documentation or a conservative RF profile estimate. Verify against official documentation or controlled test data before use.

Dataset reviewed: May 2026

This record should be treated as a planning estimate until confirmed against official documentation or regulatory evidence.

Always verify frequency data before field use. Specifications may vary by region, firmware version, antenna configuration, and operating mode.

Looking for more drone models?

Search and filter RF parameters for 92+ drone models in our full Signal Database.

Open Signal Database →